

|
A Complete detailed set of assembly
instructions are provided with each awning. General Household
Tools are needed to install the Kit.
The Kit is designed so that any
"Do-It-Yourselfer" or Homeowner can install it with no
problems and enjoy years of care free use.
Tools Required:
1. Electric drill with screwdriver bits and a
1/4" (Magnetic) hex bit.
2. 3/8" Drill bit.
3. Hack saw or electric jig saw with a fine toothed
blade for metal.
4. Caulking gun.
5. Measuring tape.
6. Screwdriver.
7. Hammer.
8. Metal snips.
9. Socket (Magnetic Tip) and shank.
10. Crescent wrench.
11. Level.
12. Carpenter's square.
13. 2 Ladders.
14. Heavy duty pencil.
15. 1/4" Masonry bit.
Our Quality Door Hoods are
manufactured from the same components as our attached patio covers and
free- standing carports
with the exception of the post assemblies and the downspout. The parts list on our attached carports & patio covers can be found (Here) . With our Door Canopies, the posts are replaced with "return" arms which attach to
the wall of the structure and the downspout is replaced with a "Scupper"
attached to the gutter which diverts the water away from the structure. These units are
designed to cover areas over doors to help keep
stairs, entries, and landings free from excessive
water. |
| COMMON
TERMS & USES FOR OUR PRODUCTS |
|
Door Canopies
|
aluminum awnings, door canopies, door
awnings, aluminum awning, door canopy, door awning,
aluminum, door, canopies, door cover |
|