STANDARD ALUMINUM PATIO COVERS

TECHNICAL INFORMATION

SIZE OF AWNING MEASURING EAVES

 

SIZE OF AWNING
The Projection is the distance out and length is the distance along the house.
Measure the area you want covered, not where you want the posts.
The Covered area will be to the end of the rafters and to the end of the lattice tubes.
 

MEASURING EAVES/FASCIA

If you are going to be attaching your awning to the eave / fascia then you will need to take three (3) measurements for us to let you know if the engineering will work so you can obtain a permit.
1) Rafter Spacing on Center:  Measure from the outside of one rafter to the inside of the next rafter to get your spacing on center; usually rafters are spaced every 16 or 24 inches.
2) Rafter Size: Measure the width and height of your rafter, usually rafters are either 2" x 4" or 2" x 6".
3) Eave Projection:  This is the distance out from the wall to the outside of the fascia board.  When you measure this do not follow the angle of the rafter, you will want to measure straight out from the wall using a level.

Note: When attaching to the fascia you will need to place a 90 Degree clip from the rafter to the fascia board.  This clip is commonly known as an A-34 clip, you will have to purchase this locally for very little expense at any Home Center.  This may be a problem for you if you have a closed soffit, you have to be able to get into the back side of your fascia to install this clip or you will not be able to meet engineering and obtain a permit.

 

COMMON TERMS & USES FOR OUR PRODUCTS
Carports car port, metal carport, carport cover, carports, car ports, aluminum carports, aluminum carport, freestanding carports, metal carports, carport covers, carport kits, build a carport, do it yourself carports, attached carport, aluminum carport kits, car port kit

 

 

 

 

 

COMMON TERMS & USES FOR OUR PRODUCTS
Standard Aluminum
Patio Covers
aluminum patio cover, patio covers, patio awnings, aluminum awnings, metal patio cover, porch cover, patio roof, roofing, covered area, aluminum shade protection